Cosmolite® Zero — Crystalline Silica Laboratory Report
Analitica · Report 2607/528 · October 2, 2026
X-ray diffraction: total crystalline silica below the laboratory detection limit of 0.1%. The complete, unedited report is provided.
DOWNLOAD PDFCosmolite Central Certifications Hub
The Cosmolite Zero silica test report and supporting Cosmolite environmental and technical documents, organized in one place. EuroStone is a registered distributor of Stone Italiana products in California.
11 documents · Original, complete PDFs · Manufacturer and laboratory attribution retained
Only the laboratory report below specifically identifies Cosmolite zero. The broader Cosmolite EPDs, climate summaries, technical manual and company policy do not, by themselves, establish Zero-specific certification. Check each document’s formulation, thickness and scope before using it for a project.
Zero-specific laboratory evidence. The result applies to the tested Cosmolite zero sample; it is not a certification of every Cosmolite formulation.
Analitica · Report 2607/528 · October 2, 2026
X-ray diffraction: total crystalline silica below the laboratory detection limit of 0.1%. The complete, unedited report is provided.
DOWNLOAD PDFFabrication guidance and manufacturer policy from Stone Italiana. These are supporting documents, not independent Zero-specific certifications.
Stone Italiana · Fabrication guidance
Manufacturer guidance for working with Cosmolite. The manual requires water during cutting to control dust; follow its safety instructions and applicable workplace requirements.
DOWNLOAD PDFStone Italiana · June 2025 revision
Company-level quality, environmental and occupational-safety policy, rather than a product test certificate.
DOWNLOAD PDFBroader Cosmolite environmental declarations, distinguished by formulation and thickness. Product-group averages and thickness-specific declarations have different scopes; neither should be treated as a duplicate or automatically as a replacement for the other.
EPD-IES-0020981 · March 24, 2025
Mining mineral oxides · Product-group average covering 1.2 and 2 cm thicknesses.
DOWNLOAD PDFEPD-IES-0020980 · March 24, 2025
Mining and processing mineral oxides · Product-group average covering 1, 1.2, 2 and 3 cm thicknesses.
DOWNLOAD PDFS-P-13678 · May 15, 2024
Mining mineral oxides · Thickness-specific declaration for 1.2 cm.
DOWNLOAD PDFS-P-13681 · May 15, 2024
Mining and processing mineral oxides · Thickness-specific declaration for 1.2 cm.
DOWNLOAD PDFCompanion climate summaries linked to the referenced EPDs—not four additional independent certifications. Each summary retains its own formulation and thickness scope.
References SP-13680
Mining mineral oxides · 2 cm thickness.
DOWNLOAD PDFReferences SP-03540
Mining and processing mineral oxides · 2 cm thickness.
DOWNLOAD PDFReferences SP-13678
Mining mineral oxides · 1.2 cm thickness.
DOWNLOAD PDFReferences SP-13681
Mining and processing mineral oxides · 1.2 cm thickness.
DOWNLOAD PDFExisting guidance remains available below. These links are not additional entries in the 11-document collection.
Read the existing Cosmolite Zero test-results page.
VIEW PAGEThe existing EuroStone technical overview, separate from the manufacturer’s fabrication manual.
VIEW PAGEGeneral food-contact documentation; check the listed product scope.
VIEW PAGEGeneral project-support information, not a separate Cosmolite certificate.
VIEW PAGERelated safety guidance for fabrication and handling.
VIEW PAGE